Do you have any questions that I can help you with?
|
Physical Condition:
Good
Working Condition:
Fully Functional
|
Terms of sales:
90-Day Warranty
Product Tested:
Tested Good
|
Includes a Fujikura FSM-30S Splicer, Inno VF-78 Precision Cleaver, Aitelong SAT-3E13 Optical Laser Source, Aitelong SAT-4E11 Optical Power Meter and Accessories.
Manufacturer DescriptionFujikura FSM-30S Fusion Splicer:
The FSM-30S utilizes the direct core monitoring Profile Alignment System (PAS) to achieve ultra low loss and very accurate splice loss estimation regardless of fiber quality or age.
While smaller and lighter than previous models, the FSM-30S has increased capabilities and more operating modes. The FSM-30S optical system and microprocessor automatically align the fibers and inspect cleave quality. By using the Eccentricity Correction Function (ECF), the splicer determines the fiber core/cladding eccentricity and automatically compensates for in order to assure precise core alignment of the completed splice. The field-proven performance and reliability of Fujikura core alignment PAS splicers are improved with the new FSM-30S.
Inno VF-78 High Precision Cleaver:
VF-78 High Precision Cleaver is an instrument for high precision fiber cutting. It is compact and light, making it ideal for both single and ribbon fiber cleaving (2-12 core). The blade provides over 48,000 cleaves with easy blade position selection. Additionally, it has an automatic collector for fiber shards and off cuts to help reduce the chance of stray fiber shard splicing contamination.
Aitelong SAT-3E13 Optical Laser Source:
Fujikura FSM-30S:
Fiber Splicing Capabilities Single Fiber: SM @ 1310 nm
DS @ 1550 nm
CS @ 1550 nm
MM, Erbium Doped fiber
Splice Loss Typical 0.02dB with SM fiber
0.01dB with MM
0.05dB with dispersion shifted
Return Loss 60dB or greater
Cleaved Fiber End Angle Alarm Programmable up to 5º
Viewing Method CCD Camera with high resolution 4" LCD monitor with excellent viewability in direct sunlight
Memory 100-splice data sets with internal memory.
(Increased to 1600 data sets with optional 64 KB PCMCIA memory card and 24,000 splice data sets with 1MB memory card.
Operating Temperature -10ºC to +50ºC
Power Supply 85 to 265 VAC (50/60 Hz)
10 to 15 VDC
Dimensions (W X D X H) 21cm x 18.7cm x 17cm (8.3" x 7.4" x 6.7")
Weight 8.0 kg (17 lbs)
Inno VF-78 Precision Cleaver:
Dimensions (mm): 81W x 72D x 62H, Weight: 350g, Fiber Diameter: 0.125mm, Type: 0.25-0.9mm, Fiber Cleave Length: 6-20mm, Cleave Angle: 0.5 degrees, Life of Blade: Total 48,000 cleaves (1,000 fiber for 1 step x total 16 steps x 3 heights), Operation: 2 Step, Reclaim: Blade pushback.
Aitelong SAT-3E13 Optical Laser Source:
Working Wavelength: 1310/1550nm, Output Power: 0, -3, -6 dBm (error: ±0.2), Spectrum Width: = 5nm, Output Stability: ±0.03dB/15min; ±0.05dB/8h, Output Mode: CW, 270Hz, 1KHz, 2KHz, Optical Identification Distance: 5km, Display: LCD, Auto Turn-Off Time: 30-99 minutes or none, Interface: FC, SC, ST, Power Supply: (2) AA 1.2V nickel-hydrogen rechargeable batteries, Luminous Parts: LD, Working Temperature: -10~+50ºC, Storage Temperature: -40~+70ºC, Maximum External Dimensions: 140mm x 72mm x 38mm, Weight: 0.3kg
Aitelong SAT-4E11 Optical Power Meter:
Detector: InGaAs, Wavelength (nm): 850~1700, Working Wavelength (nm): 850, 980, 1300, 1310, 1490, 1550, 1625, Measurement Accuracy (±5%): -70~10dBm 0.1nW~10mW, Optical Interface: FC, ST, SC, Resolution: 0.01dBm; 0.1W~1%, Power Supply: 2 X 1.5V AA alkaline batteries, Working Temperature: -10~+50°C, Storage Temperature: -40~+70°C, External Dimensions (mm): 140 x 72 x 38, Weight (Kg): 0.25
See Larger Image
