Computer controlled data acquisition system. 5 parts make up the system we have: dell computer, custom acquisition system with national instruments hardware and software installed, interconnect cables, three stainless steel cylinders are included but not required to operate this system.
The computer is operational and has Windows 98 installed. Also installed are several National Instruments DAQ boards which can be programed for controlling and monitoring a process controlled system. National Instrument’s LabView 6.1 is installed and is the controlling software interface for the NI PCI-232/16 acquisition boards. No documentation was received with this systems to the wiring of the interface board.
Test Info: It did not come as a complete system when recieved. However the computer and the interface box could be used to make a system, the hardware installed with the software could be used to set up a process control system. All that is need is a program in LabView and wire in the interface box in order for a system. The cards are outdated but still usable since the drivers are installed on the hard drive. Tested operation of the computer. User “test” was created to log into the computer. No password is required, just press “enter” The DAQ hardware will need to be initialized by the new user for use to monitor and control their processes.
We know little about this sytem. Please contact us if you are familiar with this item.
Chemical Dosing System, Computer Controlled Automatic
- Item ID: 251814
- Brand: Custom
- Model: Chemical Dosing System
- Availability: In Stock
- Condition: Parts/Repair