Authorized INNO Sales & ServiceAuthorized Sales & Service Center

  • INNO TS-8 Thermal Stripper Thermal Strippers

TS-8 is INNO Instrument's newly developed hand-held type thermal stripper installed with a heater to strip the jacket of ribbon cable up to 12 fibers. With this unmatched device, extreme convenience for use in the FTTx field and under tough environment is ensured.

Features/Benefits:

Dedicated stripper for ribbon fiber cable

Hand-held type stripper

World's fastest heating time of 4 sec

Long lasting battery: Approx. 500 times with a fully charged battery

Simple operation

TS-8 is developed as a dedicated stripper mainly for ribbon cable with thermal heater. WIth its sumple and fast operation, anyone can do clear stripping with near-zero failure. It is a very stable tool with lightweight material and compact design. With easy hand operation, it provides long lasting battery capacity: approximately 500 times of ribbon fiber cable stripping.

Package includes:

  • TS-8 Thermal Stripper
  • LBT-8 Internal Battery
  • AR-8 Power Adapter
Fiber Material Silica Glass
Coating Material UV cured Resin
Coating Thickness "Single fiber: 0.25~0.4mm2 to 12 Ribbon fiber: 0.3~0.4mm”
Cladding Diameter 125µm
Coating Removal Length max 30mm
Heating Mode Normal mode / Power save mode
Temperature Settings Normal mode: approx. 75℃, 90℃, 105℃, 120℃
Power save mode: approx. 65℃, 80℃, 95℃, 110℃
Fiber Holder Type FH-2, FH-4, FH-6, FH-8, FH-10, FH-12, FH-250, FH-900,
FH-U (Universal Holder both for 250μm and 900μm)
Power Supply Method 1) Internal rechargeable battery
2) AC drive: AC100~240V, 50/60Hz
3) DIN port: DC 12V power supplied from fusion splicer
Operating Condition Temperature: 0℃~40℃ / Humidity: 0%~95%
Applicable Fiber Type Single fiber: 250μm, 900μm, 3.0mm fiber cable and flat cable
Ribbon fiber: 2 to 12 ribbon fiber cable
Heating Time Approx. 4~5sec at normal mode
Approx. 5~6sec at save mode
Battery Capacity Approx. 500 stripping with 12 ribbon fiber with a full charged battery
Specifications
Specification
Fiber Material Silica Glass
Coating Material UV cured Resin
Coating Thickness "Single fiber: 0.25~0.4mm2 to 12 Ribbon fiber: 0.3~0.4mm”
Cladding Diameter 125µm
Coating Removal Length max 30mm
Heating Mode Normal mode / Power save mode
Temperature Settings Normal mode: approx. 75℃, 90℃, 105℃, 120℃
Power save mode: approx. 65℃, 80℃, 95℃, 110℃
Fiber Holder Type FH-2, FH-4, FH-6, FH-8, FH-10, FH-12, FH-250, FH-900,
FH-U (Universal Holder both for 250μm and 900μm)
Power Supply Method 1) Internal rechargeable battery
2) AC drive: AC100~240V, 50/60Hz
3) DIN port: DC 12V power supplied from fusion splicer
Operating Condition Temperature: 0℃~40℃ / Humidity: 0%~95%
Applicable Fiber Type Single fiber: 250μm, 900μm, 3.0mm fiber cable and flat cable
Ribbon fiber: 2 to 12 ribbon fiber cable
Heating Time Approx. 4~5sec at normal mode
Approx. 5~6sec at save mode
Battery Capacity Approx. 500 stripping with 12 ribbon fiber with a full charged battery

 

Warranty
Warranty Contact for Warranty Details

Write a review

Note: HTML is not translated!
    Bad           Good

INNO TS-8 Thermal Stripper

  • Item ID: 254110
  • INNO Instrument
  • Brand: INNO Instrument
  • Model: TS-8
  • Availability: 3-5 Days
  • Condition: New
  • $699.99


Related Products

Tags: INNO, TS-8, Thermal, Stripper, Strippers, Instrument