The NSC-1 Series motion controller is a powerful single axis machine control system which combines a bipolar micro-stepping driver with a programmable controller into a compact envelope. The motion controller can operate as a stand-alone system through the RS-232 port. It utilizes a 32-bit microprocessor to control the trajectory profile, acceleration, velocity, deceleration. Our controller is commanded using virtually any programming language to pass simple ASCII command strings to the controller through the RS-232 port. If closed loop motion control is required, the NSC-1 can be expanded to handle differential inputs from an encoder. This motion controller is used, and in great condition.The NSC-1 needs a 120VAC power adapter. It does not come with the power adapter.
|Output Current||2A Typ., 4A Peak (programmable to lower current settings)|
|Motor Type||2/4 Phase bipolar stepper|
|Microstep Resolution||Programmable up to 51200 steps per rev. (1.8° motor)|
|Communications||RS-232, 4800 to 38.8kbps|
|User Program Sapce||8175 Bytes |
|Program and Data Storage||Flash|
|Number of I/O||6 (Software selectable as dedicated or general purpose)|
||5 1/4 x 4 x 3 1/4"