This used SDL FiberLaser FL 10 is in good physical condition.

Specifications
Specification

Optical Specifications

Power Output: 9.0 W cw
Power Monitor Calibration: ± 8% full scale
Auto-Power Shut-Off: >10% over rated power
Control Modes: Current or Power selectable
Peak Wavelength Range: 1110 ± 5 nm
Bandwidth: 2 nm (FWHM) typical

Collimated Output Beam

Beam Diameter: 7.7 mm ± 0.8 mm(nominal, 1/e2, full width)
Beam Divergence: ≤0.2 mrad(nominal, 1/e, half angle)
Beam Centration: ≤500 µm (w.r.t. central axis)
Beam Pointing: ≤10 mrad
Beam Circularity: ≤1.1 ≤1.1

Electrical Specifications

Input Power: 90-130 or 180-250 VAC, 48-66Hz
Risetime: <500 µsec. Pulsed mode emission available through TTL pulsed input
Control: Front display & RS232 Interface


Mechanical Specifications

Beam Attenuator: Electrically operated for safety purposes
Cooling Air Flow: Internal fan. At least 3” (80 mm) clearance, both sides
Weight: <19 lbs.

Warranty
Warranty 14-Day Warranty

Write a review

Note: HTML is not translated!
    Bad           Good

SDL FL10 FiberLaser

  • Item ID: 253060
  • Brand: SDL
  • Model: FL10
  • Availability: In Stock
  • Condition: Used
  • $1,255.00


Related Products

Tags: SDL, FL10, FiberLaser, Lasers