This linear slide by Thomson is 20 inches long (without motor) and has a travel of 17 inches. The platform is 2in x 2in with a threaded hole (that accept M3) on each corner. The support slide has the exact same length, travel and thread sizes; however, it is just meant for optimizing stability and does not have a motor. The motor is a 2-phase hybrid step motor with a high torque design. It is terminated with 8 motor leads which can be connected a variety of ways. The two slides are in very good condition with minor cosmetic wear. The motor has not been tested, but also looks good cosmetically. There is no part or model number marked on the stage and we are therefore unable to identify the exact model.
Actual item shown. Sold as pictured. Please contact us if you have any questions.
|Lead Wire Config.||No Connector|
|Lead Wire Gauge||26AWG|
|Step Angle||1.8 deg.|
|Insulation Class||Class B (130C)|
|Shaft Run Out||0.001 inch T.I.R. max|
|Radial Play||0.001 inch max|
|End Play||0.003 inch max w/ 2.2lb load|
Thomson Motorized Linear Slide w/ Supporting Slide
- Item ID: 253877
- Brand: Thompson
- Model: N/A
- Availability: In Stock
- Condition: Used