This Ultracure is in very good condition and is fully operational. It is the 019-00036 Product Option; which means, it has shutter variation, 12 volt output and a special pinout. It has an operational timer which will shut off the light path when the count down is over. It also contains a 320-500nm filter. We are providing a light guide (8mm diamterand 1 meter long) and foot pedal along with the curing system.
High Pressure 100 Watt mercury Vapor Short Arc
Flexible Liquid Light Guide .75 to 3 meters in length, with core diameters of 3mm, 5mm and 8mm. Extended range light guides for use with 250-450nm filter.
High Efficiency, Switch Mode, Constant Power Output
AC Input Voltage
AC Input Current
Less than 50A at 90 degrees (cold start)
12" x 11.5" x 6" (L x W x H) (30.5cm x 29.2cm x 15.2cm)
Pins 1 and 2 on the remote connector. Pin 1 is common while pin 2 is positive. Zero voltage contact type of input. Internal pull-up resistor. Maximum current source is 4mA
Isolated Trigger Output
Pins 3 and 4 on the remote connector. Pin 3 is common while pin 4 is a positive open collector type. Maximum impressed voltage across pins 3 and 4 is to be less than 25VDC, while ensuring that the maximum current is less than 10mA. Maximum current sinking capability is 10mA.
Integrated thermal cutout on power supply module. The power supply also providdes over-voltage and short circuit protection.
Shutter disable feature that prevents shutter from opening when the light guide is not present.
Not all specs gauranteed due to the variety of different options available for manufacturer.
Efos Ultracure Plus 100SS UV Spot Curing System (Option 019-00036)