This is a ribbon type splicer. Requires special gas to operate. Also requires software to control motors and splicing operation. Gas and software not available for evaluation; partially tested only.

We know little about this unit. Please let us know if you're familiar with it.


Applied power to the equipment. Fan motors are operational. The left fiber holder block appears non-functional.


Specs and Descriptions are for fully functional units. *This item is offered as parts/repair only.

Overall Size:
Width: 17.0" (432 mm)
Depth: 13.0" (330 mm)
Height: 5.9" (150 mm) to work surface.
Weight: 46lb. (21 kg)

Universal AC input.
Input: 90-26 VAC, 47-63 Hz, Single phase.
PC Input: 115 or 230 VAC, 47-63 Hz, Single phase.
Gas Supply: Argon, Zero grade 10 at psig.

Fusion Method: Filament fusion.
Maximum Filament Temperature:~ 5600° F (3100° C)
Furnace "Z" Movement: +/-40mm from home position.
Alignment: Automatic or manual alignment by CCD-based imaging system.
Fiber Position, (X/Y): Stepper motor controlled, (1 mmresolution).
Fiber "Z" Movement: 100mm max. travel (0.8mmresolution).
Fiber Viewing: External CCD/zoom lens imaging system; 2-axis view on PC monitor.
Strength Enhancement: Automated post fusion fire polish process.
Fiber types: Silica, quartz, soft glasses.
Max. Cladding Diameter: 1500μm silica, 2000μm soft glass.
Max. Buffer Diameter: 3.0mm.

Warranty Contact for Warranty Details

Write a review

Note: HTML is not translated!
    Bad           Good

Vytran LDS-1250 Large Diameter Splicer

  • Item ID: 253572
  • Vytran LLC
  • Brand: Vytran LLC
  • Model: LDS-1250
  • Availability: In Stock
  • Condition: Parts/Repair
  • $981.00

Tags: Parts/Repair